Inverted Bucket Steam Trap with inbuilt strainer. Cast Steel construction. SS Internals, Horizontal configuration. End conns.: Screwed NPT / BSPT / BSP / SW / FL.

Inverted bucket steam trap with integral strainer and all stainless steel internals.
Best suited for equipment drains with medium to heavy condensate loads.
Intermittent operation.

The inverted bucket arrangement operates on the density difference between steam and water, giving a cyclic operation for discharge of the accumulated condensate.
High condensate handling capacities even at low pressure, permit the use of small trap sizes to suit many applications.
The valve and valve seat are hardened by a special induction hardening process to withstand continuous prolonged operation.
Perfect shut-off, no steam loss.

Limiting Conditions:

PMA: Max. allowable pressure 16 bar (g)
TMA: Max. allowable temperature 426ºC
Maximum operating back pressure at the outlet should not exceed 90% of the inlet pressure
Minimum differential pressure for satisfactory operation 0.1 bar
Cold hydro test pressure 32 bar (g)

Size: DN10, 20, 25

Connections: Screwed (NPT/BSPT/BSP), Socket Weld / Flanged

PMO (bar) 10 12.5
TMA (ºC) 426 426
Capacity at PMO (kg/hr) 260 390
Size DN10, DN25 DN20, DN25